Get Mirobot on your WiFi network

This document is relevant only for the following hardware:

Getting Mirobot on your network is crucial if you want to be able to use the apps or update the firmware. Here’s how to do it:

Join the Mirobot WIFi network
Load local.mirobot.io in your web browser
Click on “Configure WiFi” at the top right of the web page that loads or click on “Connected to WiFi” to reconfigure the settings
This will bring open a menu which will let you configure the WIFi:
Select your WiFi network from the drop down list of networks that the robot can see
Enter your WiFi password and press “Save Settings”
Click out of the box that popped up and wait for “Configure WiFi to turn green and say “Connected to WiFi”
Click on “Connected to WiFi” again and you can find the IP address that has been assigned to Mirobot. If you re-join your own network you can access Mirobot via this IP address.